Hammer Grinder for Pole Piece

In this economically booming area, many people know that Hammer Grinder for Pole Piece, crusher technology is in a leading position in the same industry.

Hammer Grinder for Pole Piece Technology is designed and manufactured in the core work.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

AlPa Hard Paint Powder Hammer Grinder for Piele Piece Case Sharing:
A gypsum company is an integrated enterprise, production, sales and export of sulfate powder, export, company products In industries such as building materials, molds, food, medicine, rubber, plastics, coatings.
The company adopts advanced modern production equipment and leading production technology, natural gypsum, natural plaster powder, desulfurized gypsum powder variety, high grade, quality, and export to all parts of the country, partially exported to Japan, South Korea, South Africa , Egypt and other countries are favored by users.
Case parameters:
Product particle size: 4-15 um
Hours Yield: 3-6T

Hammer Grinder for Pole Piece is a crusher, any mechanical equipment, before use There must be a certain precaution, be sure to check the precautions, so that the damage rate is minimized, then what is the precaution before using a jet ball mill? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked.