Rod Pin Mill of Quartz Powder

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, continuously improve your technical level, and constantly improve your own products, in order to make the airflow classifier industry have a broader development space.

When the ROD pin mill OF RATZ POWDER screen material, the screen has good commonity under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.
The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

Welcome Big powder grading needs manufacturers, to the factory to visit, incompetent experiments.

1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food drug is crushingIt is necessary to achieve the best choice for food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, and there is no iron pollution.(2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal.(3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.

Shan Dong Alpa is committed to Rod Pin Mill of Quartz Powder, has a mature process process, has a high-energy technology R&D team, specializing in crusher research and development, survive by quality, welcome everyone to consult.