Rotor Crusher for Single Crystal TerNary

Rotor Crusher For Single Crystal Ternary can be used in the industry's industrial production process, and ALPA has been committed to the development and application of equipment such as grading machines for many years. The classifier has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.

The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

AlPa Steel slag Rotor Crusher for Single Crystal Ternary case share: This customer is Xi'an Steel Slag Application Technology Co., Ltd., mainly engaged in re-use research and development of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA Vertical Air Classifier.

Product particle size: D97: 5-75μm
hour yield: 200-500KG

In the production process, we should pay attention to maintenance and maintenance of Rotor Crusher for Single Crystal TerNary. .

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.
3, which should be regularly inspected, replace it in time to ensure quality and production.
4, shouldRegularly check the wear of the blade and lining. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

To learn more about the knowledge of Rotor Crusher For Single Crystal Ternary, please pay attention to the Shan Dong AlPA website, the company is in the development and production of crusher and other products, quality up, and is trustworthy. .