Cell Mill for Cobalt Tetroxide

Cell Mill for Cobalt Tetroxide is good, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

What factors affect the performance parameters used by Cell Mill for Cobalt Tetroxide?

The following is a detailed description:

1. Feed granular control

Most Cell Mill for Cobalt Tetroxide has a certain upper limit requirement for the particle size of the feed. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

Currently, the working medium of Cell Mill for Cobalt TETROIDE is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Cell Mill for Cobalt Tetroxide during pulverization, as the material particle size is reduced, the crystallization and strength of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.



ALPA Chemical Raw Powder Cell Mill for Cobalt Tetroxide Case Sharing:
A mechanical company is a company engaged in the development and manufacture of solder wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment and other equipment high-tech enterprises.
With complete, scientific quality management system and powerful R&D team, and continuously improve product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.

Product particle size: Remove 20μm with fine powder
hour production: sorting efficiency 60-90%

There are many kinds of pulverizer, generally according to customer requirements Customized, longer during construction. But only suitable for the most, you can play a better role. The airflow mill manufacturer provides excellent quality equipment to customers, while ensuring the quality of the equipment, also provides a better service for our customers.
Want to do the quality of the crusher, it is to fully combine its functionally stable amount, so it can be practical. In the process of ensuring product supply, the product effect is obvious. The most important equipment is to do quality, the service is the second, only to do good quality, we can easily do a good job.

Shandong Alpa is a 20-year experience manufacturing company with Cell Mill for Cobalt Tetroxide equipment, has a number of patents, welcome to inquire!