Impact Mills for Spinel

Most of the product production and processing of the current stage uses Impact Mills for Spinel to use IMPACT MILLS for Spinel, which is one of the very common ways of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment is replaced. It is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.
ALPA Peel Peas Impact Mills for Spinel Case Sharing: The company has a food professional processing company in R&D, processing and sales, and has been discovered by multi-examination or our AlPA's Impact Mills for Spinel to meet all needs.
Technical parameters:

Installation considerations for installation
1, the primary device such as the classifier, fan, etc. During the transportation process, there is an organic damage after storage, check the equipment inner cavity and the fan airway, rotate the grading impeller and the wind turbine spindle, and observe whether it is flexible.

3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.

TodayThe knowledge of Impact Mills for Spinel will introduce you to here. If you want to learn more, please continue to pay attention to our website.