Rotor Mill for Besylate

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Rotor Mill for BESylate can effectively improve the level of massage of materials and greatly improve productivity. Rotor Mill for Besylate has received attention, and the prospect has also been optimistic about many people.

1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
ALPA Phenolic Resin Rotor Mill for Besylate Case Sharing: The company has a manufacturer of phenolic resin in its customers. The company has found many powder equipment companies without suitable equipment. Finally, we found our ALPA, after the experiment, our company's product Rotor Mill for Besylate.
Technical parameters:
Finished product particle size: D50 less than 5μm
Production capacity: greater than 50kg / h

Rotor Mill for Besylate is a more accurate machinery, in daily use and During the maintenance process, some details still need the operator's attention. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In production, a certain number of materials must be maintained in the airflow grinding chamber. In the case where the flow rate of the pulverized gas is not changed, the material in the grinding cavity is large, the gradient current is large, and the material is small in the grinding cavity, the gradient current is small.
In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.

Regular maintenance equipment, often check whether the air supply pressure meets the pressure required, and the gas flow grinding motor, after 3,000 hours of operation, or long-term shutdown and long-term storage, should be cleaned in a gas flow grinder nozzle and grindingThe inner wall of the cavity and attached to the material grading portion to prevent the effect of gas flow grinding on the grinding effect.


The technology of Rotor Mill for BESylate produced by AlPa makes the structure easier to make the classifying machine wear resistance.Friends needed to come to us!