Hammer Mills for Straw

Hammer Mills for straw can be used in the current industrial production process, and ALPA has been committed to the development and application of equipment such as grading machines for many years. The grading we produced during the development process The machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.

Hammer Mills for Straw features, a small amount of wear-resistant components made of special hard wear raw materials, small size, light weight, convenient replacement replacement. Hammer Mills for Straw compressed air is filtered, and the material is repeatedly collided with a multi-shaped high pressure airflow intersection. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. Hammer Mills for straw processes the speed of 20m / s high-speed blow, which affects other high speed movements. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.

ALPA Case Sharing: The company is a high-tech industry in a industrial company, a mineral resource exploration, mining, and deep processing, main products have six categories: long stone powder, silicon fine powder , Aluminum soil, kaolin and other products. The product is high, the particle size, reasonable particle size distribution, stable quality, widely used in electrician, electronics, silicone rubber, ceramics, precision casting and other industries. Products are exported to many countries and regions in China. The company needs airflow selection to ultrafine long stone powder.
Finally, our classifier can meet customer needs.
Product particle size: D50: 16.7

Hammer Mills for straw is necessary to clean the air pulverizer after long-term use. After cleaning the pulverizer, all machines must be removed. Detaching skill is also very good. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is removed, four screws on the base can be removed, and then remove the hopper. When the screen is removedAt the time, the airflow pulverizer can be opened directly, and the screen can be removed at the end.After the mobile gear is removed, the fastening nut is released first, and then the live teeth are separated from the spindle.Then move the mobile gear and put it safely.Remove the fixed gear, remove the screw and remove the fixed gear.Be careful when disassembling the gas flow crusher.Do not cause any damage to the components of the machine itself.