Pin Mill for Textile Inkjet

pin mill for Textile Inkjet plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of pin mill for Textile Inkjet, the various major industries are particularly medical, the food industry has put forward new purity in the pulverization process. Requirements, it is desirable that the powder can be kept clean. In traditional Pin Mill For Textile Inkjet, carbon steel, stainless steel is generally used as a lining material of Pin Mill for Textile Inkjet.

Technical parameters:
Finished product granularity: 10-45μm
Production capacity: 300kg

1, new When the installed device, when the equipment is connected and labzed to the warehouse, it is inevitable that foreign matter such as iron block, welding head, welding slag is residual. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the turbine is slightly leaking.To use your hands or fine powder, there is a feeling of suction in the interface, if you have a sealing treatment.After all of the above tests are normal, prepare the material production.