Turbo Mill of ibuprofen

Turbo Mill of ibuprofen can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also to promote after-sales maintenance services for customers, service attitude

[123 The temperature in Turbo Mill of IBuProfen is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

ALPA Sulfate Turbo Mill of IBUPROFEN Case Sharing: This customer is a Saudi company, you need to grade the potassium sulfate ultra-fine powder, investigate the international powder equipment company, and finally chose our alpa grading. Machine equipment.

Ultra-micro Turbo Mill of Ibuprofen's correct usage:
1. Ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

Shan dong alpa specializes in Turbo MilL of iBUPROFEN product technology production and development and service, welcome to consult.With a perfect quality, excellent service, the most affordable price, the company provides the best crusher products and services for customers.