Cell Grinder for Stainless Steel Powder

In the rapid development of rapid, there are many people have a certain understanding of Cell Grinder for Stainless Steel Powder, and crusher technology is in an absolute leader in the industry.

The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

ALPA CDC Cell Grinder for Stainless Steel Power Case Sharing: This customer is a large-scale comprehensive group company specializing in the mining, powder processing and sales of heavy crystalline mines, and before the customer It is from foreign imported crystalline stone crushing equipment. Later, by understanding, knowing the ultrafine pulverization equipment of our ALPA Co., Ltd., in terms of performance, in terms of foreign devices, far exceeding the same type of equipment, far exceeded the same type of equipment. Finally, after many exam, I purchased the Cell Grinder for Stainless Steel Powder from our company.
Technical parameters:
Finished granularity: 1250 mesh
Production capacity: 1.2-1.5T

Cell Grinder for Stainless Steel Powder silo is not small, the material is more accumulated The silo plate knot, the material moisture, the material appears in the silo, and the silo cone design does not have the rest of the material. Solving silo does not small materials suggests design phase to fully understand the properties of materials, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive properties. Using auxiliary measures, such as air disc, air hammer, air blowing, vibration discharge mechanism, artificial hitting, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.
Cell Grinder for STainless Steel Powder's feeding system is one of the key components. It is often encountered in actual use, such as the silo that is not affected, and the feed is not uniform, and even can't feed. Simple analysis of non-uniform feeding of feed is more sticky or fluidity, and the design of the feeding system is designed. Feeding uneven resolution suggests based on material properties systemic solution, such as silo structure, auxiliary sheet structure, feeding valve structure, auxiliary feeding measures, and ventilation and control systems. The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three components, depending on the material properties, the design parameters of the feeding system are different.

The above is the use of the Cell Grinder for Stainless Steel Powder product and simple solution. Everyone must pay more attention when using.