Hammer Grinder for Silicon Dioxide

Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder mills on materials, Hammer Grinder for Silicon Dioxide is the most effective equipment for achieving ultrafine powder mills. one. In China, after 20 years of development, Hammer Grinder for Silicon Dioxide industry has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.

Hammer Grinder for Silicon Dioxide's temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

ALPA Chemical Material Powder Hammer Grinder for Silicon Dioxide Case Sharing:
A mechanical company is a research and development, manufacturing, manufacturing of solder wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment, etc. high-tech enterprises.
With complete, scientific quality management system and powerful R&D team, and continuously improve product performance.
The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: Remove 20μm with fine powder
hour production: sorting efficiency 60-90%

Ultra-micro Hammer Grinder for Silicon Dioxide Machine Maintenance and Store Precautions:
1, often check the fastening of each component, preventing it from falling off, damaging the machine.
2, each oil injection hole should be refueling, and the bearing portion is cleaned every half year to fill the lithium-based grease.
3
4, when the machine is deactivated, the external debris should be cleared, and the grease is filled with all the rotating parts, stored in the storage of air drying, non-corrosive gas.

The technology of Hammer Grinder for Silicon Dioxide produced by AlPa makes the structure easier to make the classified machine wear resistance. Have a friend who needsCome and contact us!