Pin Mills for Fesib

With the development of society, the application of pin mills for FesiB has become more large.

High-temperature pin millS for FOR FESIB performance characteristics:
1, the content classification device, the product particle size D97: 8-150 microns can be adjusted, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.

ALPA Gypsum PIN MILLS for FOR FESIB Case Sharing: The company is a more well-known non-metallic mine enterprise in South Africa. The company's main product is a super fine ultra-fine micropowder of the non-metallic mine such as square solution and gypsum. Through our website, our company learned our equipment and read our case, and finally chose to purchase our company's PIN Mills for Fesib as its gypsum ultrafine powder production line.
Technical parameters:
finished particle size: D97: 5μm
Production capacity: 140kg

What should I pay attention to? Before running, the operator needs to confirm the feedstock supply Whether there is foreign matter in the entrance and exit. Whether there is any raw material at the exit. If the foreign matter is found to handle a clean and then boot.
When the grading machine is operating normally, in order to maintain the stability of the grading, the pressure of the supply tube compressed gas is required to be monitored. Check if the dust collector pressure loss of the laboratory classifier is stable.
Decompose, cleaning, inspected, and maintaining the laboratory classifier must be disconnected to avoid danger.

For more consultation, please continue to pay attention to us, or inquire.