Rotor Mill of Calamine

With the continuous development of pulverizer technology, Rotor Mill of Calamine has gradually penetrated into people's daily lives.

The main application of Rotor Mill of Calamine determines its extensive application range and finished product.
Typical materials are: super hard diamond, silicon carbide, metal powder, etc. High purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the normal air of the gas source into an inert gas such as nitrogen and carbon dioxide gas, it can be used as an inert gas protection device. Suitable for crushing of flammable and explosive and oxidative materials.

Technical parameters:
finished particle size: D50: 0.8-5μm
Production capacity: 4.5 +/- 10% / T

1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.

 Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the production of feed grinding, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.

 2. Rotor Mill of Calamine mainly needs reasonable useInverse glitch: Mainly to rush the side hair of the screen into the inside, greatly increase the friction, but this method is not used for a long time.After the globi polishing, the efficiency is lowered.It lasts for 30 minutes to 1 hour.

3. Put the friction piece into the Rotor Mill of Calamine: The friction piece has the effect of the material ring, but the effect is limited.First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, everyday maintenance can be made to ensure that the equipment can run for a long time, so daily is critical to the maintenance of Rotor Mill of Calamine.