Rotor Mills of Heavy Calcium Carbonate

Rotor Mills of Heavy Calcium Carbonate can be used for important or need to be grounded to granular product processing, the ALPA ultrafine pulverizer product is good, affordable, factory direct sales, also to promote after-sales service service for customers, good service attitude

Rotor Mills of Heavy Calcium Carbonate requires the integration of equipment and technology research and development. Since the ultrafine powder grinding equipment must be adapted to specific material characteristics and product indicators, their specifications and models are varied, so there is no ultrafine powder grinding and grading equipment for any material.
Although China's crusher manufacturers are numerous, the overall R&D capability is weak, low product technology, and does not meet the application needs of high-end powder metallurgical equipment in the downstream field, and severely constrain China's crushing equipment development, with domestic manufacturers R&D The continuous investment and technology breakthroughs, domestic crushing equipment is expected to occupy greater share in the global market.

A new energy company is a high-tech enterprise specializing in research and development, production and sales of new energy materials. The company is committed to new energy Material research and innovation, the company's products include lithium batteries for special tetrashydrium 3 oxide, magnetic material tetraside and lithium battery positive electrode material manganese acid.
The company has advanced technology and excellent quality, and has established a complete quality management operation system.
Case parameters
Product particle size: D50: 15μm
Hour Yield: 600kg

1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.

2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.

3, the downtime is:

inverter -Vehicle - Main Air Valve - Compressor - Level Leaf - Motor Cyclone Material, Dust Switch - Fan - Main Power - Air Compressor.

4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.

5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Welcome everyone to choose our Shandong AlPa, company specializing in the production and development and service of gas flow crusher product technology, the company provides customers with safe and reliable products and services of RAOR MILLS OF Heavy Calcium Carbonate, solving our customersWorries.