Multiple-stage Classifier in Series of Degrading enzyme

Multiple-Stage Classifier In Series of Degrading Enzyme is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is fine, the granules are delicate, affordable, .

Multiple-Stage Classifier IN Series of Degrading Enzyme features ultrafine pulverization for dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns. 2. Relative fluidized bed gas flow pulverizer has a good crushing effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized. 3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, break, suitable for low-melting thermal sensitive materials. 4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.

Now let's talk about Multiple-Stage Classifier IN Series of Degrading Enzyme Common faults. Multiple-Stage Classifier In Series Of Degrading Enzyme Troubleshooting: 1, feed back: Improper tunnel adjustment, pipeline blockage, screen blocked, dust bag gas permeability or severe wear, hammer wear is serious, etc. can cause feedback Irrigation. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head. 2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state. 3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step. 4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hardIf stone and iron enters the machine, that is, a foreign sound will be generated, and the machine should immediately stop replacing damaged components or remove hard objects. 5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

ALPA Technology recommends that you must pay attention to periodically checking the performance of the equipment during use using ultrafine airflow classifiers, jet grading machines, powder classifiers, must pay attention to regular inspection equipment performance and prevent malfunctions during use.