Multiple-stage Classifier in Series with slag

With the development of society, the applications of Multiple-Stage Classifier In Series with SLAG have become more large.

Multiple-Stage Classifier In Series with SLAG has several types: air flow grinding, fluidized bed flame mill, circulating tube gas flow grinding, jet gas flow grinding and target gas flow grinding. The main performance characteristics of the pulverizer: 1, the airflow pulverizer includes a vertical classification device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes. 2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is sealed, less dust, low noise, and production process clean and environmentally friendly. 3. The airflow pulverizer control system uses program control and easy to operate.

What is the grading principle and process of Multiple-Stage Classifier In Series with SLAG? Below, below share. 1. Open the switch in the control cabinet, start the power supply, the device operation; Physical role such as airflow and gravity is graded in three parts; 5, the airflow of three flow paths has a control valve group adjustment to maintain their respective balance; 6, the grading thick Chinese products are recovered separately; 7, clean air There is a blower to discharge into the atmosphere.

Let's learn with Xiaobian to learn the Multiple-Stage Classifier In Series With SLAG inspection steps. Multiple-Stage Classifier In Series With SLAG is an apparatus that uses air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. Crushed material passes through the negative pressure air flow caused by the fanThe crushing room, entering the material collection system, filtered through the filter bag, the air is discharged, the material, dust is collected, and the pulverization is completed. After the disc airflow pulverizer is opened, first examine whether the equipment is damaged in the transportation, then put the high machine and the auxiliary electric control device in place, then turn on the pipeline of the main aircraft, each pipe opening is assembled. The "iron anchor 609" liquid sealing glue is coated with a seal to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosions caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm, the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty car, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed after the electric carrier current is stable. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subjected to the amount to ensure that normal operation of the discharge is fixed. The stepless speed handle of the classifier can change the speed of the hierarchy wheel while achieving the excellent adjustment of the product. If the particle size of the article is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced. The above is that the user receives the normal acceptance operation process after receiving the multiple-stage classifier in series with slag products. You can try to identify the use.