Single Classifying Wheel Classifier quartz

my country's overall development trend is the reverse development of low cost, high efficiency, strong power, strong dispersibility, quality and stable, etc., for various types of ultrafine pulverized equipment Higher technical requirements are put forward. Single Classifying Wheel Classifier quartz Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder will play an increasingly important role in high-tech research and development. Although high purity ultrafine powder is prepared by chemical synthesis, high cost is too high, very difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies, and its development also depends on the progress of the related technologies. Therefore, the main development trend of ultrafine crushing equipment has the following aspects to develop fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high processing skills. Integrated development of equipment and process research. Ultra-fine and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be adapted.

Let's take a look at how to extend the use of Single Classify Wheel ClassifierQuartz: 1. Strictly follow the operating procedures; 2. If the damaged parts should be paid attention to the time check, replace it in time. 3. The device body has no rotating components, not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our body part uses special material production, the use of the knife tip is at least more than one year, the knife tip is wear more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife tip; 4. It is recommended to use the long filter device to improve equipment stability, and ensure grading accurate.

In the production of Single Classify Wheel Classifierquartz, there will be a lot of dust, and if there is a lot of dust, it will have a certain impact on the environment. How should we deal with it? Method: 1. Install the dust collector: Generally now, this dust collector can be used with a powder classifier, it will drop dust into the bag, dust from the dust boxThe bag is filtered through the bag; 2, the bag is dustproof: the bag is tightly pulled with the machine to prevent leakage powder. Attention should be paid attention to parking, and it should be cleaned with dust during parking. 3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.