Horizontal Air Classifier for Polyethylene terephthalate

In the classification operation of the industrial production at this stage, the use of Horizontal Air Classifier For Polyethylene Terephthalate is mainly targeted by solid particles, and is a crushing device that is commonly used in the product ultrafine pulverization process. .

Horizontal Air Classifier for Polyethylene TerephthaleThelene Terephthalate should be cleared in time when there is oil, Horizontal Air Classifier for polyethylene terephthalate has been exchanged into industrial manufacturing fields. Equipment, as a common production equipment, it is not only advantageous, and sometimes Horizontal Air Classifier For Polyethylene Terephthalate is also damaged. Let's take a look at how to check the repair equipment. Daily maintenance Horizontal Air Classifier for polyethylene terephthalate To check the power outlet, plug, the power cord has no oxygen officer, the break, if you do not have a power test, when the motor is not rotated, use the hand to light the wheel When it is rotatable, it can be determined that one capacity invalid in the two start capacitances of the machine. If you can send a discharge spark and a very fringe, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has dropped, and the new or add a small capacitor. If the airflow pulverizer does not use this method if the capacitor has been damaged, and it must be repaired with the same size. In addition to Horizontal Air Classifier for polyethylene terephthalate, there is also a rod mill high-speed crusher. This crusher is very good. It is very difficult to damage, while daily maintenance is more important, the following is the maintenance of this type of airflow pulverizer Focus. Check if the lubrication of the bearing is good to check all fasteningWhether the piece is tightened. Check if the drive belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean. Check if the protective device is good, if it is found that the protective device is unsafe phenomenon, it should be excluded in time. Check that there is an ignorant or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic top machine head or the starting roof rod is returned, adjust whether the gasket is properly installed correctly and compact. The above is the Horizontal Air Classifier for Polyethylene Terephthalate manufacturer's knowledge of daily maintenance and maintenance.