FL Multiple-stage Classifier in Series quartz

With the continuous advancement of pulverizer technology, Fl Multiple-Stage Classifier In Seriesquartz has been familiar with people. The most popular pulverized device is now the FL Multiple-Stage Classifier In Seriesquartz. It has a wide variety, available in laboratory, home and factory use. It has the advantages of large productivity, low energy consumption, high automation, and high classification quality, and has been widely used.

FL MULTIPLE-Stage Classifier In Seriesquartz uses a high intelligent control system, easy to operate, easy to adjust, long service life, the main lossable parts affecting system equipment life is a grading knife, if wear is seriously replaced If it affects the grading accuracy of the equipment.

In the production process, we should pay attention to maintenance and maintenance of FL Multiple-Stage Classifier In Seriesquartz. 1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find out the cause and troubleshoot. 2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt. 3, should be checked regularly, replace it in time, and ensure quality and production. 4, should check the wear of the blade and lining periodically. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced. 5, the host and the hierarchical flow bearing use grease lubrication. 6, the replacement period of the bearing is 2000 hours, the amount of grease is 1/2 or 3/4 (lower test) of the bearing cavity space cannot be filled with too much fat. Otherwise, the temperature of the bearing will be too high. 7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease. 8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part. 9. It is strictly forbidden to turn the handle of the handwheel in the stop. 10. The lubricating oil used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines. 11. After 3000 hours, the new oil should be replaced, then in the second timeAfter converting over 500 hours, use it for 1000 hours.

To learn more about Fl Multiple-Stage Classifier In Seriesquartz, you will go to Shandong AlPa Powder Technology Co., Ltd., the company is in research and production of crusher and crusher related products, quality, and deeply consumption Welcome, trustworthy.