Multiple Classify Wheel Classifier for ammonium sulphate

Publish: 2021-09-30 17:04:49

Views:

Let's take a look at how to extend Multiple Classify Wheel Classifier for ammonium sulphate: 1, strictly follow the operating procedures; 2. If you are damaged parts, you should pay attention Today's check, replace it in time. 3. The device body has no rotating components, not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our body part uses special material production, the use of the knife tip is at least more than one year, the knife tip is wear more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife tip; 4. It is recommended to use the long filter device to improve equipment stability, and ensure grading accurate.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-z7-degree anti-motor oil pressure oil, and the deceleration machine is used 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

ALPA Design Multiple Classify Wheel Classifier for Ammonium Sulphate equipment has got a very good reputation in actual production applications, and also won the praise of users and friends. If you need to buy Multiple Classify Wheel ClAssifier for Ammonium Sulphate, please feel free to contact us.

Previous: FL Multiple-stage Classifier in Series for White corundum

Next: Multiple Classify Wheel Classifier of calcite