Multiple Classify Wheel Classifier for rice

Publish: 2021-09-30 17:04:25

Views:

MULTIPLE CLASSIFY WHEEL CLASSIFIER FOR RICE is suitable for smashing machines of materials such as synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus produced high frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer has little increase in the cyclic temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean, and maintenance. Generally, the outer casing uses water cooling and its own air volume, conveying crushing material, improves the temperature, and reducing the thermal material. The wear of the blade is caused by a large amount of ultrasonic vortex generated by the back of the blade and the vibration of the high frequency pressure. Compact structure, no dust, no problem.

Multiple Classify Wheel Classifier for Rice is widely used, do you know how to use it correctly? The following content hopes to help you. 1. Preparation before departure. Check whether the host, joint, pipeline, and the valve are normal, working properly. 2. Turn on the machine (1) Open the compressor power, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust collector, charge motor, turn on the total power box, set the inverter frequency, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, stop sequence: inverter - feeder - main air valve - compressor - grade impeller - motor cyclone material, dust removal switch - fan - Main power supply - air compressor. 4. Maintenance (1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4) After the filter bag is a period of time, it should be cleaned or replaced. 5. Precautions (1) When the discharge equipment is running, the unloading port cannot be reached to avoid accidents. (2) Leaf rotation speed must notMore than the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged. (3) Regularly check the safety valve to ensure safety.

Through the above learning, it is more understandable for maintaining the Multiple Classify Wheel Classifier for Rice. For more information, please continue to pay attention to our website.

Previous: Multiple Classify Wheel Classifier Silicon nitride

Next: FL Multiple-stage Classifier in Series for White carbon black