FL Multiple-stage Classifier in Series of Silicon nitride

Fl Multiple-Stage Classifier In Series of Silicon Nitride is a high-speed airflow to form a high-speed airflow using multiple relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the grading chamber with the rising airflow. Since the grading rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the hierarchical rotor, and the center of heart is generated by the viscous effect of the airflow. When the centrifugal force of the particles is greater than the heart force, that is, the fractional particle diameter The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air. Low temperature without medium smashing, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet is more than 30% of the conventional gas flow milling machine, and the grading accuracy is higher. ALPA equipment is small, and the structure of the pulverizer can be highly machined ultrafine powder, avoiding the wear of the horizontal grading machine grading part, and the service life of the equipment and easy-to-load load under the same material is multiple products. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

Fl Multiple-Stage Classifier In Series of Silicon Nitride Applications 1. High Hardness Materials: silicon carbide, corundum, carbide, alumina, zirconia, garnet, zircon sand, diamond, etc. 2. Non-metallic minerals: quartz, graphite, kaolin, calcium carbonate, mica, heavy crystal stone, mullite, wheat stone, silica bites, talc, leaf wax stone, etc. 3. Chemical industry: aluminum hydroxide, silica gel, various dyes, epoxy resins, various auxiliaries, etc. 4. Food medicine: pollen, hawthorn, pearl powder, Ganoderma lucidum, various vegetable flour, various Chinese herbal medicines, various health products, cosmetics, antibiotics, etc. 5. Metal materials: aluminum powder, magnesium powder, zinc powder, tin powder, copper powder, etc. 6. Other materials; ceramics, refractory materials, electronic materials, magnetic materials, rare earth materials, phosphors, photocopying materials.

After long-term use, it is necessary to clean Fl Multiple-Stage Classifier In Series of Silicon Nitride. All machines should be in front of the airflow pulverizerThis disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When unloading, you can remove the four screws on the base and remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the mobile gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and never allows damage to the machine components.

Fl Multiple-Stage Classifier in Series of Silicon Nitride produced in our company can not only distribute 20-2μm from the ordinary powder, but also directly with mechanical pulverization equipment, forming a closed circuit. Improve the crushing efficiency, and can avoid high temperatures in the cavity to cause adhesion, glue, causing the operation to be unable, and the grading machine has also received a wide range of users, and the friends who need it will contact us!