Single Classify Wheel Classifier of Modified starch

Single Classify Wheel Classifier of Modified Star provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radial direction of the pulverized chamber and is distributed at the same level. The jet stream rotates with the material with a very high speed, forming a fluid power characteristic on the radius of the pulverizer. Material particles collide with huge momentum. Material As airflow high-speed exercise, a serious impact, friction and shear of the grinding chamber, resulting in wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high-speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the motion of the machine gun, the inner spiral cyclone and outer spiral void are added. The limit is aggregated to the axis of motion to reduce the friction of the tube wall and reduce the metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed and eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone below the broken chamber, the ball media and materials are irregular in the entire simplified body. Scroll, make the ball media and materials have a double effect of collision and grinding, resulting in fine grinding, uniform dispersion.

The working principle of Single Classify Wheel Classifier of Modified Starch is a complete crushing system composed of crusher and cyclone separator, dust collector and air. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the grading area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the grading cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh-hardness, especially for high hardness, high purity, high value-added crushing materials. It includes vertical divisionLevel device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process mainly depends on the collision of the material itself, which is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment has high wear resistance and high product purity.

Weifang ALPA well-known airflow crushing equipment brand, free professional transport plan, German advanced process, stable performance, high efficiency of airflow, support customization !!!