FL/ITC Single Classify Wheel Classifiersalt

FL / ITC Single Classify Wheel ClassifiersalT is suitable for combating machinery of materials such as synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus produced high frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer has little increase in the cyclic temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean, and maintenance. Generally, the outer casing uses water cooling and its own air volume, conveying crushing material, improves the temperature, and reducing the thermal material. The wear of the blade is caused by a large amount of ultrasonic vortex generated by the back of the blade and the vibration of the high frequency pressure. Compact structure, no dust, no problem.

FL / ITC Single Classify Wheel Classifiersalt works by a classifier, a cyclone separator, a dust collector, and a ventilator. Under the pulverizer pulling force, the lower end of the gas pulverizer is moved upward to the grading area, and the coarse, and the fine product is separated from the high-speed rotation grading turbine. The cyclonic separator or dust collector is collected by the grading wheel, and the fine particles required to meet the particle size are collected, and the coarse particles are collected. The speed of the ellable fine particles disappears and falls along the two air ports of the cylinder wall. The crude particles and fine particles separated by strong purification of the two winds, and the fine particles rose to twice the grade region, and the crude particles drops to the discharge port.

Let's take a look at the FL / ITC Single Classify Wheel Classifiersalt instructional step with Xiaobian. Fl / ITC Single Classify Wheel ClassifiersalT is a device for ultrafine pulverized dry materials using air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. Crushed material passes through the fanThe caused negative pressure airflow brings out the crusher, enter the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. After the disc airflow pulverizer is opened, first examine whether the equipment is damaged in the transportation, then put the high machine and the auxiliary electric control device in place, then turn on the pipeline of the main aircraft, each pipe opening is assembled. The "iron anchor 609" liquid sealing glue is coated with a seal to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosions caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm, the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty car, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed after the electric carrier current is stable. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subjected to the amount to ensure that normal operation of the discharge is fixed. The stepless speed handle of the classifier can change the speed of the hierarchy wheel while achieving the excellent adjustment of the product. If the particle size of the article is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced. The above is that the user receives the normal acceptance operation process after receiving the FL / ITC Single Classify Wheel Classifiersalt product. You can try to identify the use. , Users of medical gas flow crusher, ultrafine pulverizer, cone mixer, Chinese medicine crusher and other products can contact us.