FL/ITC Single Classify Wheel ClassifierAluminum hydroxide

Fl / ITC Single Classify Wheel Classifieraluminum Hydroxide acts as a striped main device, and the role is increasing, in the industrial sector of metallurgical, mine, chemical, cement, has a large number of raw materials and reuse each year. Waste is required to process processing with a classifier. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size of the next job requirements. In the chemical, power sector, the hierarchy, the raw material is broken, grind, and increases the surface area of ​​the material, has created favorable conditions to shorten the chemical reaction of the material.

FL / ITC Single Classify Wheel Classifieraluminum HydroxIDE is designed and developed using a mixed powder spraying principle. Suitable for pharmaceutical, food, chemical and other industries. It is widely used. Cold source forms a closed circuit circulation system, which takes advantage of energy and saving energy: warming can be reduced to zero down 196 degrees, depending on the embrittlement temperature of the material, the temperature can be controlled by the pulverization process, select the best grinding temperature, reduce the pulverization fine The degree can reach 10-700 energy consumption, and even reachabited micron wood fineness.

Let's learn about the knowledge of FL / ITC Single Classify Wheel Classifieraluminum Hydroxide lubricants. Select FL / ITC Single Classify Wheel ClassifieralUMinum Hydroxide Lubricants to select the type and label of the lubricant according to the instructions on the device manual. General FL / ITCSingle Classify Wheel Classifieraluminum Hydroxide equipment manufacturer's production and use of lubricants is very clear. This requires we choose in actual work. Select according to the working conditions of the equipment. For machines with higher temperatures, high viscosity oils, ensure the thickness of grease under normal operating conditions, and ensure smooth flow of lubricants in low temperature environment; when the mechanical operating speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil with a slightly high viscosity should be used to ensure the thickness of the grease. When purchasing the FL / ITC Single Classify Wheel ClassifieralUM Hydroxide lubricant, the physical properties and chemical properties, such as viscosity, flash point, corrosion resistance, etc., but also combined with the manufacturer's description, considering the premise of considering comprehensive benefits and management benefits Under, minimize the type and quantity of oil, to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of oil. When the lubricant is in contact with the non-ferrous metal, it will oxidize its performance, and the corrosion will damage the machine during use. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration. The above is the knowledge of the pulverizer lubricant purchased by Fl / ITC Single Classify Wheel Classifieraluminum Hydroxide manufacturers