FL/ITC Single Classify Wheel Classifier of Granulated sugar

Fl / ITC Single Classified Sugar is different from other crushers, which are collisions between particles, airflow impact and shear, high-speed airflow impact, Friction and shear and other components for pulverized pulverizer. It has the following main features: 1. The grinding temperature is low, can pulverize the thermal, low melting material. According to the high-speed jet Joule effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction. 2, short production cycle, high release rate. Due to high-speed collisions and closed crushing, the probability of collision between materials is very large, and dust does not leak. 3. Products having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained. 4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder. 5. A variety of joint operations can be achieved, and drying operations can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a raised role in the pharmaceutical industry.

FL / ITC Single Classified Sugar Main Performance Features: 1, using vertical hierarchical devices, the product particle size is adjustable between D97: 8-150 microns, good particle shape, narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes. 2, the equipment is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is less, low noise, and the production process is clean and environmentally friendly. 3. The control system uses program control and easy to operate.

Now let's talk about FL / ITC Single Classify Wheel Classifier of Grand Sugar's common fault elimination. FL / ITC Single Classified Sugar Classifier Of Granulate Class Sugar Troubleshooting: 1, Feedback Scrap: Improper Treas, Pipelines, Scifings, Dipped Pocket Specificity or Severe WearThe wear is serious, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathable, or replace the hammer head. 2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and the spindle, the balance the rotor and the adjustment belt are elastic, the bearing can return to normal state. 3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step. 4, there is a sound inside the crusher: the components of the crusher are damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should immediately stop the damaged parts or remove the hard object. 5, low production efficiency: insufficient electric power, misconduct of pulley, slippery slip, hammer wear, and high raw material uneven or high water content is the main reason for the low production efficiency. We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.