FL/ITC Single Classify Wheel Classifier with Polyethylene terephthalate

During the production process of fracturing using FL / ITC Single Classify Wheel Classifier With Polyethylene Terephthalate, the supersonic gas stream generated by the device can constantly collide between materials, and this super The aerospace flow of the sound can also produce a good impact on raw materials, and then the material can also achieve a good crushing effect with the inner wall of the equipment.

FL / ITC Single Classify Wheel Classifier with Polyethylene Terephthalate Working Principle: The power of the machine uses purification and dry compressed air. The compressed air is sprayed to the crushing chamber at high speed over a special supersonic nozzle. The airflow has a high speed movement of the material, causing strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the particle size, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.

Let's learn with Xiaobian to learn FL / ITC Single Classify Wheel Classifier With Polyethylene Terephthalate inspection steps. Fl / ITC Single Classify Wheel Classifier with Polyethylene Terephthalate is an ultra-smuggled apparatus for dry material with air separation, heavy polishing, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber by the feed opening, and is crushed by the polishing wheel that is circumferential movement along the grinding rail, and dissensibly. The pulverized material brings out the pulverizer through the negative pressure air flow caused by the fan, into the material collection system, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed. The disk airflow pulverizer is first cleared, first check the equipmentNo in the transportation, then the high machine and the auxiliary electric control device are in place, then turn on the pipeline of the main aircraft, and the seal is used to use a seal when assembled, and the iron anchor 609 "liquid sealing glue is used. To ensure the sealing of the pipe, each single machine and pipe are connected to the ground wire, and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm, the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty car, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed after the electric carrier current is stable. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subjected to the amount to ensure that normal operation of the discharge is fixed. The stepless speed handle of the classifier can change the speed of the hierarchy wheel while achieving the excellent adjustment of the product. If the particle size of the article is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced. The above is the normal acceptance operation process after the user receives the FL / ITC Single Classify Wheel Classifier with Polyethlenene Terephthalate, you can try to use it

Today FL / ITC Single Classify Wheel Classifier with polyethylene terephthalate's knowledge, Just introduce you to here, you want to know more information, please continue to pay attention to our website.