FL/ITC Single Classify Wheel Classifier with ammonium sulphate

Fl / ITC Single Classify Wheel Classifier With Ammonium Sulphate Slow Wheel Whenever Clean FL / ITC Single Classify Wheel Classifier with ammonium Sulphate has been exchanged into a must An indispensable device, not only the advantages, but also the FL / ITC Single Classify Wheel Classifier With ammonium sulphate will also be damaged. Let's take a look at how to check the repair equipment. Daily Maintenance FL / ITC Single Classified Wheel Classifier With Ammonium Sulphate To check the power outlet, plug, the power cord has no oxygen offset, break, if you do not have a power test, when the motor is turned, When the drain sheet can be rotated, it can be determined that one capacity fails in the two start capacitors of the machine. If you can send a discharge spark and a very fringe, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has dropped, and the new or add a small capacitor. If the airflow pulverizer does not use this method if the capacitor has been damaged, and it must be repaired with the same size. In addition to FL / ITC Single Classify Wheel Classifier with ammonium Sulphate has a rod mill high-speed pulverizer, this crusher general quality is very difficult to damage, while daily maintenance is more important, the following is this type of airflow pulverizer Maintenance focus. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean. Check if the protective device is good, if it is found that the protective device is unsafe phenomenon, it should be excluded in time. Check that there is an ignorant or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic top machine head or the starting roof rod is returned, adjust whether the gasket is properly installed correctly and compact. The above is FL / ITC Single Classify Wheel Classifier With ammonium sulphate manufacturer's knowledge of daily maintenance and maintenance.