FL/ITC Single Classify Wheel Classifier with carbon black

FL / ITC Single Classify Wheel Classifier with Carbon Black Installation in the venue. Before you work, you should pick up the processed material, no metal, stone, etc., hard substances, mix into the machine, so as not to damage the parts in the machine or failure. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, turn it in 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed. When working, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately. When machining raw new friends Chinese medicine crusher, the discharge port should be tiered with a long cloth bag. When the pulverizer is in use, if you encounter a power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

Fl / ITC Single Classify Wheel Classifier With Carbon Black, it is also called a supersonic pulverizer, before the invention, the principle of the device is: utilizing compressed air through the feed injector, with pulverization, multiple high speeds The flow driven jet pulverizes all methods of friction of the wall of the crushing effect, and control the milling damage by adjusting the depth of the grinding of the grinding, vertically or adjusting the feed speed.

In the production process, the temperature rise of the bearing must be often checked, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault. When the new machine is running, the transmission belt is easy to elongate, pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt. If you want to check, you should replace production quality and production in time. Blades, the lining should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is replaced after the particle size is replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the outer space space in the bearing cavity. Do not fill the grease. Otherwise It will cause too high of the bearing temperature. The spiral feeder has changed the lime than half a year, and the calcium-based grease is added. In the output shaft E, ie the pulley E, avoiding heavy hammer, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator, using N32 alkaline high-z7-degree of high-grade anti-motor hydraulic oil, reducerUsing 401 generally lubricating oil, do not replace it with other machines. After four or five months, new oil should be replaced.

ALPA Technology recommends that you must pay attention to periodically checking the performance of the equipment during use using ultrafine airflow classifiers, jet grading machines, powder classifiers, must pay attention to regular inspection equipment performance and prevent malfunctions during use.