FL/ITC Single Classify Wheel Classifier for Metallic silicon

In the process of production, FL / ITC Single Classify Wheel Classifier for Metallic Silicon mainly uses the freezing, filtration and drying in the device, and forms a supersonic. Air air flow. After a powerful pressure rotation is incorporated into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.

Let's take a look at how to extend FL / ITC Single Classify Wheel Classifier for Metallic Silicon: 1, strictly follow the operating procedures operation; 2. If you are damaged parts, you should pay attention to time check, timely replacement. 3. The device body has no rotating components, not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our body part uses special material production, the use of the knife tip is at least more than one year, the knife tip is wear more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife tip; 4. It is recommended to use the long filter device to improve equipment stability, and ensure grading accurate.

How to install FL / ITC Single Classify Wheel Classifier for Metallic Silicon, the following content hopes to help you. 1. Chinese medicine shredder should be more smooth and easier to use. 2. Before working in traditional Chinese grinding machines, a clean processing material must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults. 3. Before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work. 4, turn on the power, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag. 5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is used normally, it is not easy to damage, and the production efficiency is high.

Shandong Alpa Powder Technology Co., Ltd. is a world-renowned particle and powder processing system supplier. If you want to consult related questions, you can get the answer you want by asking Shandong Alpa to get the answer you want, but it is not just a device. Price, there may be powder technology solutions in your industry, welcome to call us.