FW/HTS Multiple Classifying Wheel Classifier with Metallic silicon

Publish: 2021-08-31 20:33:31

Views:

FW / HTS Multiple Classifying Wheel Classifier WITHALLICON is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

So what is the grading principle and process of FW / HTS Multiple Classifying Wheel Classifier WITHALLICON? Below, below you share. 1. Open the switch in the control cabinet, start the power supply, the device operation; Physical role such as airflow and gravity is graded in three parts; 5, the airflow of three flow paths has a control valve group adjustment to maintain their respective balance; 6, the grading thick Chinese products are recovered separately; 7, clean air There is a blower to discharge into the atmosphere.

FW / HTS MULTIPLE CLASSIFYING WHEEL CLASSIFIER WITALLICON's daily maintenance is a very important part, which describes the maintenance method of FW / HTS Multiple Classify Wheel Classifier With Metallic Silicon. 1. When the machine is started or started, the appropriate amount of grease should be applied to ensure its life. 2. Check if the screws and nuts of each component are fastened. Check if the belt is stuck, whether it is tight. 3, regularly check the reliability of the equipment, prevent accidents or accidents. 4. The direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine. 5, equipment maintenance should be carried out by professional and technical personnel, other people must not be carried out to avoid damage to the equipment. 6, electrical components and lines should be checked regularly, whether it is intact, whether the ground is reliable. 7. The equipment should be cleaned in time to prevent the next use to avoid contamination materials.

Previous: FW/HTS Multiple Classifying Wheel Classifier for Granulated sugar

Next: Horizontal Single Classifying Wheel Air Classifier with Diclofenac