Horizontal Single Classifying Wheel Air Classifier of Polyethylene terephthalate

Now the market is very large, and its grading quality and level are very large. In general, the evaluation of the grading performance of grading machine is expressed in grading efficiency and grading accuracy. But the definition of ranking efficiency and grading accuracy has many inconveniences in practical applications. Through the level of grading efficiency and grading accuracy such as the collected evaluation grading performance and classification accuracy.

Let's learn about Horizontal Single Classify Wheel Air Classifier of Polyethylene Terephthalate Lubricants. Select Horizontal Single Classifying Wheel Air Classifier of Polyethylene Terephthalate Lubricants to select the type and label of the lubricant according to the instructions on the device manual. General Horizontal Single Classify Wheel Air Classifier of Polyethylene TerephthaleTe Equipment SystemIt is very clear that the production and use of lubricants will not be clear. This requires we choose in actual work. Select according to the working conditions of the equipment. For machines with higher temperatures, high viscosity oils, ensure the thickness of grease under normal operating conditions, and ensure smooth flow of lubricants in low temperature environment; when the mechanical operating speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil with a slightly high viscosity should be used to ensure the thickness of the grease. When purchasing the Horizontal Single Classifying Wheel Air Classifier of Polyethylene Terephthaland, the physical properties and chemical properties, such as viscosity, flash point, corrosion resistance, etc. should also be combined with manufacturers, considering comprehensive benefits and management benefits. Under the premise, minimize the type and quantity of the oil as much as possible to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of oil. When the lubricant is in contact with the non-ferrous metal, it will oxidize its performance, and the corrosion will damage the machine during use. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration. The above is the Horizontal Single Classifying Wheel Air Classifier of Polyethylene Terephthalate manufacturer's knowledge of the crusher lubricant

Compliance to follow the management of the standard, put the quality in the first production and service policy, Provide products and services to our customers with confidence with a weighing airflow mill.