FW/HTS Multiple Classifying Wheel Classifier with calcium carbonate

FW / HTS Multiple Classifying Wheel Classifier WITH CALCIUM Carbonate is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, AlPa crushing machine is good, granules are delicate, affordable .

FW / HTS MULTIPLE CALASSIFYING WHEEL CLASSIFIER WITH CALCIUM CARBONATE Main Features: 1, using vertical hierarchical devices, product particle size is adjustable between D97: 8-150 microns, good granules Narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particle sizes. 2, the equipment is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is less, low noise, and the production process is clean and environmentally friendly. 3. The control system uses program control and easy to operate.

Do you know how to correctly use FW / HTS Multiple Classifying Wheel Classifier WITH CALCIUM CARBONATE? I hope the content below can help you. 1. Preparation before the comminution is started to check whether the host, joint, pipeline, and the valve are normal, working properly. 2, open the pulverizer (1) Open the compressor power supply, dustpress pressure valve and the main valve, open the power switch of the pulverizer, turn on the power switch. (2) From zero, gradually adjust to the specified speed. (3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging. (4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel. 3, pulverizer shutdown is: inverter - feeder - main valve compressor - compressive type impeller motor - cyclone material, dust removal switch - fan - universal power supply air compressor. 4, eddy current pulverizer maintenance (1) Regularly lubricate eddy current crushing machine, but the lubricant should not be too large to prevent the bearing temperature too high. (2) Check the wear of the impeller, screw conveyor and the crushing nozzle. (3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect. (4)The eddy current pulverizer filter bag After a period of time, it should be cleaned or replaced. 5, Eddy Current Crusher Precautions (1) When the discharge equipment is running, the unloading port cannot be reached, and the accident occurs. (2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged. (3) Regularly check the safety valve to ensure safety.